Coarse 80 Grit Electroplated Diamond Burr 10 Piece Kit

A budget electroplated option to replace the coarse sintered diamond burrs that I use on the Roys Rocks YouTube channel (https://www.youtube.com/c/RoysRocks).
 
This set is designed for the coarse carving step and can remove rock quickly and is an  80 ANSI grit. Ideally suited for the rapid carving of rough material. The shank size is 3/32" or 2.38mm and head is 15mm x 6mm.
They are electroplated diamond burrs and therefore wear very quickly but are a cheap starting point to try carving before committing to sintered diamond tools.
 
Instructions can be found on the tool instructions page (HERE), and of course, there is plenty of extra info on the youtube channel.